AxiomLineUserGuide
3.6.1Zones
The Zone feature on your Axiom is used to control several different sound devices at the same time. In doing so, you can create
splits, layers, harmony effects and more.
For example, you can split the keyboard on your Axiom so your left hand plays a bass sound and your right hand plays a piano
sound. You can create a setting where you hear a chord by playing a single note, or you can set up a way to quickly switch between
different instruments. The Zone feature on the Axiom allows you to do all of these things and more.
3.6.2Activating/DeactivatingZones
There are four zones assignable on the 49- and 61-note versions and three zones assignable on the 25-note version. To activate/
deactivate zones, rst press the Zone/Group button which will light.
To enable/disable any zone:
< Press the Zone/Group button.
< On 49- and 61-note versions use Zone buttons 1, 2, 3 and 4, located beneath faders D9 through D12 to activate/
deactivate Zones 1-4 respectively.
< On the 25-note version, press the LOOP, RW and FF buttons to activate/deactivate zones 1-3 respectively.
< Press the Zone/Group button again to exit.
* When you enable a single zone, the other 2 (or 3) zones are automatically disabled. To enable multiple zones, press the
respective zone activate/deactivate buttons at the same time.
The active zones will always be shown on the LCD display
Zones have a number of parameters associated with them and editing these parameters affects all zones that are currently active
simultaneously. Editing the various Zone parameters is described below.
The active/inactive status of each zone can be stored to the 20 memory locations. You must ensure Group A is activated when
storing this data since the Zone settings are stored within this group. Please see section 3.2.1 for more information on Groups.
3.6.3ZoneChannel
If you want to use the Zone feature to control a number of different instruments, you need to set each of the zones to transmit
on different channels.
To assign the channel of a zone:
49- and 61-note versions:
< Press Glob Chan and Zone Range together to access the Zone Channel setting. The LED in the Zone/Group
button lights to indicate that Zone/Group mode is automatically selected.
< The LCD displays the current transmit channel for the automatically selected zone and ashes its symbol. Use
Zone buttons 1 through 4 to select a different zone if necessary. While multiple zones can be active at the
same time, only the zone with the ashing symbol will be affected by this change.
< Enter the new channel number (00 to 16) using the numeric keypad. (Please note that assigning the zone to
channel 00, will set the zone to transmit on the Global Channel (see section 2.2)).
< Once the channel edit is complete, Zone/Group mode exits automatically.
< Repeat to edit the channel settings of the remaining zones.
25-note version:
< Press the Advanced button.
< Press the Zone Chan key
< The LCD displays the current transmit channel for the automatically selected zone and ashes its symbol. Use
Zone buttons 1, 2 or 3 to select a different zone if necessary. While multiple zones can be active at the same
time, only the zone with the ashing symbol will be affected by this change. Enter the new channel number
(00 to 16) using the numeric keypad. (Please note that assigning the zone to channel 00, will set the zone to
transmit on the Global Channel (see section 2.2).)
< Press the Enter key to conrm.
< Repeat to edit the channel settings of the remaining zones.
The transmit channel of each zone can be stored to the 20 memory locations. You must ensure that Group A is
activated when storing this data since the Zone settings are stored within this group.. Please see section 3.2.1 for more
information on Groups.
25
Section3:AdvancedFeatures |
ACEC
